11
Fig. 13
The ceiling fan installation process is now
completed.
Note: On completion of installation the
distance from floor to lowest point of fan
blades must not be less than 2.1 Meter.
(Fig.14)
NO LESS THAN
2.1 METER
CEILING
FLOOR
Fig.14
Check all the internal wiring and assembly
of the fan before operation.
Operation of Ceiling Fan
with Remote Control
Note: The operation of the Ceiling fan is
fully controlled via the remote control.
Prepare remote control for operation and
installation of wall mount remote holder.
After confirmation from Licensed electrician that
power supply to ceiling fan has been activated,
the electrician should check correct operation
of the fan.
Loosen the screw in the battery compartment
cover and then remove the battery
compartment cover of the remote control and
install the 12V ( Battery Type: 23A 12V ) supplied
with the unit,Re-fix the cover and tighten the
screw after the battery was installed.
Allow Electrician to test and confirm safe
operation.(Fig.15)
Fig.15
WARNING: Battery should insert correctly.
Do not recharge, do not dispose of in a
fire or oven, may explode, leak or cause
damage. Where possible dispose of your
used batteries through your local council
and other battery recycling centres.
Keep batteries away from children.
Installing the Remote
Control Holder
Determine a suitable spot for installing the
remote control holder in the vicinity of the
installed fan.
Locate the nearest wall stud , mark hole position
by using holder as template , drill pilot holes
smaller than diameter of the screw and secure
holder to the wall with the screws. (Fig.16)
Fig.16
