10
Default volume setting is for the max volume after you restart the system. The
default setting is 25, adjustable in 0 to 50.
Default Volume
Default Volume
25
The final menu option displays the current firmware installed on the LX
CONNECT.
Firmware
Firmware
HUB: 052.10
The LX CONNECT Hub UPDATE port is only used for updating the internal
software or service purposes. This is a non-user serviceable connection.
Please refer to the Mission website or your Mission dealer concerning updates
or service.
Update
Update
No
Update
Yes
The LX CONNECT can be restored to factory default settings.
Factory Reset
Factory Reset
No
Factory Reset
Yes
The Pre Out level can be set to adjustable or fixed.
Adjustable level output is for purposes where the output level should change
with the master level output (for instance, when connecting to powered
subwoofers).
Fixed level output is for use with sources with built-in volume control such as
AV processors, where the input signal from the hub should be constant.
Pre Out Level
Pre Out Level
Adjustable
Pre Out Level
Fixed
LX CONNECT Hub can enable or disable the wireless transfer function on the
menu. While only using the hub as DAC (without speakers), please disable the
wireless to get the best performance.
Wireless
Wireless
Enable
Wireless
Disable
LX CONNECT has three standby modes, editable via the menu.
Auto Standby Never: LX CONNECT will only enter standby through user
control.
Auto Standby 20 Minutes: If there is no input signal for 20 minutes, the
LX CONNECT will enter standby.
Auto Standby 1 Hour: If there is no input signal for 1 hour, the LX CONNECT
will enter standby.
Auto Standby
Auto Standby
Never
Auto Standby
1 Hour
Auto Standby
20 Minutes
Any channel can be set as the default channel. Additionally, this can be set,
using the 'Recall Last Input' feature.
Default Channel
Default Channel
USB
Default Channel
Recall Last Input
