MISA OPTION CloudGate, Техническая документация инструкция

Страница: 48 / 218

45 / 215
Option CloudGate - Last updated on 14/05/2014
By default, Passthrough Mode is disabled (set to No).
●
If set to Yes, the connected laptop receives an IP address from the wireless operator through the
●
CloudGate.
IMPORTANT:
IMPORTANT:
When passthrough is active, data send to port 80 will always redirect to the WebGui
When passthrough is active, data send to port 80 will always redirect to the WebGui
of the CloudGate!
of the CloudGate!
Image configuration
Selects the wireless operator firmware the device will use on the network.
●
IMPORTANT:
IMPORTANT:
When using the CloudGate WCDMA (CG0112) base unit (this is the version without
When using the CloudGate WCDMA (CG0112) base unit (this is the version without
CDMA technology), you don't have to select the wireless operator. The device uses the
CDMA technology), you don't have to select the wireless operator. The device uses the
UMTS
UMTS
Generic
Generic
setting.
setting.
If Verizon Wireless or Sprint is selected, the web interface jumps to the CDMA section. Click Start
●
Programming to provision the unit for CDMA.
If UMTS Generic is selected for T-Mobile or any operator not listed, you may be required to enter a PIN
●
code. In the PIN code section, enter the appropriate settings and click Save changes to provision the
unit for UMTS 3G.
If AT&T is selected, you may be required to enter a PIN code. In the Pin Code section, enter the
●
settings and click Save changes to provision the unit for AT&T 3G.
Connection Hunting
Connection hunting is a feature developed by Option that allows the CloudGate to activly search for
another network in case the primary network is not available.
IMPORTANT:
IMPORTANT:
The connection hunting feature is only availabe on CloudGate WCDMA + CDMA
The connection hunting feature is only availabe on CloudGate WCDMA + CDMA
(CG0192)
(CG0192)
When enabled a new section of the menu will appear allowing the user to select which other networks
the the CloudGate should try to connect to in case the primary connection cannot be established.
The fallback time field allows to select the time the CloudGate needs to try to connect to each of the
alternative networks before trying the next network.