MISA OPTION CloudGate, Техническая документация инструкция

Страница: 42 / 218

39 / 215
Option CloudGate - Last updated on 14/05/2014
IP address
Sets the IP address of the CloudGate. By default the IP address is 192.168.1.1 you can change this to
●
any value you want.
Netmask
Sets the netmask of the CloudGate. By default the netmask is set to 255.255.255.0 you can change
●
this to any value you want.
Enable DHCP server
Enables the DHCP server. By default the DHCP server is enabled. (When the ethernet port is in LAN
●
state). In case you want to use static IP addresses in your network you can disable the DHCP server.
DHCP range
Sets the DHCP range for the DHCP server.
●
DNS 1 and DNS 2
When the CloudGate is in LAN mode the DNS fields will be empty by default. As a result the CloudGate
itself will act as a DNS server. All the connected ethernet devices will receive an DNS address which is
equal to the CloudGates IP address (by default 192.168.1.1) When the DNS server inside the Cloudgate
can't resolve the DNS request it will forward the request to the DNS server of the WAN connection.
When the CloudGate is in WAN mode the DNS address will be defined by the DHCP server of the
internet provider. When the DNS fields are changed to another value than the other IP address will be
used for the DNS server.
Reserved leases
Lists the DHCP leases which are assigned to a certain MAC address.
●
Click Add to assign another lease and link a MAC address to an IP address.
●
Active leases
Lists the active DHCP leases of the devices connected to the CloudGate.
●
Click Reserve to add the lease to the Reserve leases list.
●