STEP 20: Place the Long Vertical Gasket Seal (9) on
the Door Panel (8) and cut to the correct length even
at the top and bottom.
STEP 19: Tighten the Top Hinge (5) the same way
as in the step 18.
STEP 21: Install Long Bottom Sweep gasket
Seal(16).
STEP 22: Cut the Long Bottom Sweep Gasket Seal
(16) to the right length across the width of the door
panel.
STEP 23: Measure the length required for the Short
Bottom Sweep Gasket Seal (15) at hinge-short side.
STEP 24: Cut the Short Bottom Sweep Gasket Seal
(15) to the correct length.
Short Bottom Sweep
Gasket Seal
Long Bottom Sweep
Gasket Seal
Long Bottom Sweep
Gasket Seal
