7
STEP 14: Repeat steps 11 and 12 for the Header (3)
installation. Tighten Top Header Steel Nut (14D)
snug. Reference Detail View I - Bolt / Nut assembly
(14) on page 4 of Exploded View.
STEP13: Tighten the Steel Nut (14D) on the Threaded
Stud (14A).
Note: Do not over tighten the nut as the glass
panel may shatter.
STEP 15: Place a level on the top of Header (3) to
ensure that the Header (3) is level, then tighten nuts.
Note: Do not over tighten the nuts as the glass
panel may shatter.
STEP 16: Mount Hinges (5) on the Door Panel (8),
top and bottom. Reference Detail View II - Hinge
Assembly(5) on page 4 of Exploded View.
STEP 17: Lift Door Panel (8) and mount onto the Door
Panel Threaded Studs (5G) top and bottom.
STEP 18: Insert Steel Washers (5H) and Steel Nuts
(5J). Tighten with a 9/16” wrench.
