MBD-2 Operating Manual
9
15-00167, Rev 1
4.2
Installing the Wrist Strap
The Wrist Strap is a simple, durable accessory for affixing the MBD-2 to a wrist. The Wrist
Strap uses hook and loop material with a C-shaped ring to facilitate easy donning and
securing to an outer garment sleeve.
a. Inspect the Wrist Strap seams for visibly loose stitching and frayed edges. Set aside any
Wrist Strap that appears worn.
Figure 4: MBD-2 Wrist Strap
b. Install the Wrist Strap by feeding the coarse “Hook” end through the bottom (6 o’clock
position) C-ring.
c. Loop the Wrist Strap through C Rings in the orientation as shown below – smooth side
facing away from the back case as shown in
Figure 5: Wrist Strap Orientation and
Assembly
.
Figure 5: Wrist Strap Orientation and Assembly