MBD-2 Operating Manual
4
15-00167, Rev 1
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
Modifications:
Any modifications made to this device that are not approved by Mirion Technologies Oy
may void the authority granted to the user by the FCC to operate this equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/television technician for help.
Precautions concerning the use of 3V Lithium
Batteries
•
Do not attempt to recharge or reenergize batteries.
•
Exhausted batteries immediately shall be removed as soon as practical to prevent damage from
leaking batteries
o
If batteries have leaked (dry or wet white residue), use personnel protective equipment such as
hand and eye protection to remove and clean.
•
Do not dispose of batteries in fire.
•
Do not dismantle batteries.