154VZ1 : 190111
31 / 33
10
Data reading from recording equipment
Depending on the configuration of the system, one of the options for integrating the registra-
tion device is directly via the RS485 communication bus, using a recording module integrat-
ed into the VZ1ZJ base unit device.
In the case of configuring a system with hardware of base unit with replaceable storage me-
dium of the recording module, this registered data module is accessible from the front panel
of the base unit. Removing the memory card is done by pushing it and then pulling it out of
the slot. To return the memory card, insert it into the slot and push the card fully in.
The system time for registration is set automatically when the system is configured, accord-
ing to the time on PC which the configuration is performed with. For a more detailed specifi-
cation of the time setting conditions during system configuration, see the document
547MAP.
The presentation of the recorded data from the removable storage medium is performed in
the MAP programming environment using the MAN module. A detailed specification is given
in 1997MAP.
§
Indicating units of base unit recording equipment
CLK
ZJ9
activity indication of recording equipment
ERR
ZJ10
failure of recording equipment
BOX3U
BOXKOG/BOXTUG
The full labeling of indicators is OIZJ9 and OIZJ10. For the sake of clarity the operating instructions are shortened
the designation ZJ9 and ZJ10.
