Mircom
2
FX-LOC(R) Local Operating Console
The FX-LOC(R) consists of a remote main display (RAXN-LCD), an audio indication panel RAX-1048TZDS and a
master paging microphone QMP-5101N within a small compact enclosure. The complete enclosure dimensions are
approximately 15” wide by 25” long by 5.5” deep. Refer to figure below for accurate dimensions. The FX-LOC model
provides a white door and the FX-LOCR model comes with a red door.
Summary of Parts:
1. FX-LOC(R) Enclosure consists of backbox, inner door and outer door.
2. Main Display such as RAXN-LCD.
3. Audio indication panel RAX-1048TZDS.
4. Master paging microphone, model QMP-5101N.
Figure 2: FX-LOC(R) Enclosure
The FX-LOC(R) is made up of a mechanical backbox, a middle metal chassis which the modules are attached to and
a front door with a Lexan window. The backbox may be mounted either surface or flush mount.
Surface Mount
For surface mounting the backbox is secured to the wall using six #8 screws with the six mounting holes provided.
The mounting holes are 8 1/2” apart in width and 9.4” apart in length from the top two mounting holes to the middle
mounting holes and 9” apart in length from the middle two mounting holes. Refer to figure above for all the
dimensions.
Flush Mount
For flush mount, cut out a hole 12 1/2” wide by 2
3
” long and 5” deep. Allow at least 2.5” around the cutout for the lip
of the backbox and door placement. Place the backbox into the hole and the bent edge of the box will frame the wall.
12 1/2”
14 23/32”
5 5/16”
23”
23”
9.4”
9”
24 7/8”
8 1/2”
