![background image](http://html1.mh-extra.com/html/mircom/flex-net-fx-2003-12nds/flex-net-fx-2003-12nds_installation-and-operation-manual_1805816053.webp)
FleX-Net
TM
Installation and Operation Manual
51
FNC- 2000 Fire Netw ork Controller Module
The FNC-2000 Fire Network Controller modules are wired from terminals marked Line A, positive and negative (see
specific cable recommended in Figure 35 to the Line B terminals of the next FNC-2000 module.
Use of shielded
cable is not recommended
. Wire from Line B terminals to Line A of the next FNC-2000 module. Start from the
lobby panel and wire to all the FNC-2000, wiring the last FNC-2000 back to Line B of the first FNC-2000 at the lobby
panel for Class A.
Figure 35:
Class A
Wiring for the FNC- 2000 Module
Line B
Line A
Line A
Line A
Line A
Line A
Line A
Line A
Line B
Line B
Line B
Line B
Line B
Line B
FNC-2000
Lobby Panel
FNC-2000
FNC-2000
FNC-2000
FNC-2000
FNC-2000
FNC-2000
CLASS A
WIRING
RECOMMENDED CABLE:
BELDEN 5320 UJ or 5320UM
Tyco Pyro CIC
Draka Lifeline
All above cables are 2x18AWG unshielded,
low capacitance
Network Wiring Specifications
Power-Limited and Supervised
Voltage: 9V Max
Current: 800mA
Frequency: 625K Hz
Line Loss: 25 ohms
4000 feet MAX wiring distance
with twisted pair 18 gauge wire.