![background image](http://html1.mh-extra.com/html/mircom/flex-net-fx-2003-12nds/flex-net-fx-2003-12nds_installation-and-operation-manual_1805816109.webp)
FleX-Net
TM
Installation and Operation Manual
107
QMP- 5101N/ V Netw ork Paging Wiring
Figure 73: QMP- 5101N/ V Netw ork Master Paging Control Module Wiring to the
ANC- 5000 Audio Netw ork Controller Module
JW7
JW8
+ - + -
S - +
S - +
S - +
S - + L - +
PAGING BUS
MIC
PTT
OUT
IN
ANC-5000 Audio Network
Controller Module
+
+
-
-
S
PTT
MIC
Master microphone
and push to talk button
are wired by Factory to
these terminals
QMP-5101N/V Network
Master Paging Module
+
-
Remote
Power
Input
(24V DC
Regulated
1.7 A max)
FX-2000N
Fire Alarm
Aux. Power
Supply
G.A.
Input
IN
RS-485
NOT USED
Wire the Paging Bus to
all other ANC-5000
Audio Network Con-
troller Modules OUT to
IN, see Figure 67.
TWISTED
SHIELDED
PAIR CABLE
Jumpers JW7 and JW8
are normally installed
(shorted).
This connection to Aux
Power is required when
the ANC-5000 is mounted
over an FX-2009-12NDS
Fire Alarm board.