Miranda SER-800D, Инструкция по установке и эксплуатации

Страница: 36 / 46

HD-SDI Video Output (2)
The two HD SDI video signals are output by the two OUT BNCs
connectors. The output conforms to SMPTE 292M (1.485 and
1.485 /1.001 Gbps).
3.4 Mode Selection
Figure 3.1 indicates the locations of the miniature slide switch on
the SER-800D/E.
Figure 3.1 SER-800D/E Slide Switch location
Mode A (Panasonic pinout)
Set the SER-800D/E to this mode when connecting to an equip-
ment that uses Panasonic D-SUB 50 pin-out:
SER-800D/E - Guide to Installation and Operation
6
OUT 1
OUT2
STATUS
POWER
AB HD VIDEO SERIALIZER
SER-800E
MODE
Mode slide switch
Pin # Signal* Pin# Signal* Pin# Signal*
1 CLK+ 34 CLK-
2 Data9+ 18 Data1+ 35 Data9-
3 Data8+ 19 Data1- 36 Data8-
4 Data7+ 20 Data0+ 37 Data7-
5 Data6+ 21 Data0- 38 Data6-
6 Data5+ 22 GND 39 Data5-
7 Data4+ 23 GND 40 Data4-
8 Data3+ 24 GND 41 Data3-
9 Data2+ 25 GND 42 Data2-
10 26 43 Data19-
11 27 Data11- 44 Data18-
12 28 45 Data17-
13 29 Data10- 46 Data16-
14 30 GND 47 Data15-
15 31 GND 48 Data14-
16 32 GND 49 Data13-
17 33 GND 50 Data12-