Miranda SER-800D, Инструкция по установке и эксплуатации

Страница: 14 / 46

SER-800D/810E - Guide to Installation and Operation
7
Mode B (Philips pinout)
Set the SER-800D/810E to this mode when connecting to equip-
ment that uses the Philips D-SUB 50 pin-out:
*
Note: All signals are of differential input/output type.
- Luminance channels are represented by Data0 thru Data9 for 10-bit
systems, and Data2 thru Data9 for 8-bit systerms.
- Chrominance channels are represented by Data10 thru Data19 for
10-bit systems, and Data12 thru Data19 for 8-bit systems.
3.5 Status LED
The bi-colored status LED, located next to the SER-800D input
connector or the SER-810E output connectors, is provided to
identify any input error or power supply malfunction. The follow-
ing lists the possible situations:
Green : Indicates that the SER-800D/810E is powered and has
detected a valid HD parallel video input signal.
Red : Indicates an error with the input signal has been
detected or simply, there is no input cable connected.
Off : The unit is not powered on. Check that it is connected
to the power supply, and the power supply is properly
connected to a power source.
Pin # Signal* Pin# Signal* Pin# Signal*
1 CLK+ 34 CLK-
2 Data9+ 18 GND 35 Data9-
3 Data8+ 19 GND 36 Data8-
4 Data7+ 20 Data1+ 37 Data7-
5 Data6+ 21 Data1- 38 Data6-
6 Data5+ 22 Data0+ 39 Data5-
7 Data4+ 23 Data0- 40 Data4-
8 Data3+ 24 GND 41 Data3-
9 Data2+ 25 GND 42 Data2-
10 26 GND 43 Data19-
11 27 GND 44 Data18-
12 28 45 Data17-
13 29 Data11- 46 Data16-
14 30 47 Data15-
15 31 Data10- 48 Data14-
16 32 GND 49 Data13-
17 33 GND 50 Data12-