Miranda SER-800D, Инструкция по установке и эксплуатации

Страница: 33 / 46

2 Installation
2.1 SER-800D Overview
Figure 2.1 illustrates the SER-800D major parts and their loca-
tions. The HD-SDI video input signal is connected to the IN BNC
connector and the decoded HD Parallel video signal is output
through the D-SUB 50 connector.
Figure 2.1 Overall View of the SER-800D
2.2 SER-800D Installation
To install the SER-800D directly on the destination equipment,
refer to the following diagram.
Figure 2.2 Connecting the SER-800D
SER-800D/E - Guide to Installation and Operation
3
Loop-through BNC connector
Input BNC connector
Mode slide switch
Mounting screws
Status LED
DC power input connector
50-pin output connector
Destination
HD-SDI
video
equipment
DC Power supply
Loop-through input
HD-SDI Input