background image

Product Number: QG0005-05 Revision: A0; Date: 6/18/10

5

NV9000 Control System

Installing NV9000-SE Utilities on a PC

The PC on which NV9000-SE Utilities is installed must have 
the following:

Windows XP Professional, Vista, or Windows 7.

Late-model Pentium-class processor.

256MB (or more) RAM.

At least one 10/100baseT Ethernet port 

Ensure that the PC’s network connection has a fixed IP 
address on the system controller’s house network. You do not 
need the network connection to install the software, or even 
to run the software, but you will need it to write configura-
tions to the controller.

Installation Steps

Whether you are installing NV9000-SE Utilities on the sys-
tem controller or on a PC, follow these steps:
1) Load the SB0033 CD in your PC’s CD ROM drive. The CD 

will auto-play and you will see the following screen: 

Click ‘Configuration Software’. The next page appears: 

Click ‘Install NV9000-SE Utilities’ to launch the installer.

2)  You can also copy the installer from the CD to your sys-

tem’s hard drive or a USB memory device and launch it 
from there. This is recommended if you are installing 
NV9000-SE Utilities on an NV9000 system controller that 
has no CD-ROM drive.
Double-click the copied installer to launch it.

3)  When you launch the installer, the ‘Welcome’ screen 

appears after several seconds: 

4)  Click ‘Next’. The ‘Folder Location’ screen appears: 

5)  Click ‘Next’ to accept the default location. 

Or

Click ‘Choose’ to open the ‘Browse for Folder’ window to 
browse to the folder you want. When you have selected a 
folder, click ‘OK’ to close the browse window, and then 
click ‘Next’.

Or

 

Click ‘Restore Default Folder’ if you want to restore the 
default location, and then click ‘Next’.

USO 

RESTRITO

Содержание NV9000











Отзывы: