Miranda NV8256-Plus Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 88

background image

NV8256-Plus Digital Video Router • User’s Guide

3

2. Introduction

Chapter 2 provides an introduction to the NV8256-Plus Digital Video Router. It presents the fol-
lowing topics:

•

Product Summary

•

Signal Rates Supported

•

Switching Configurations

•

•

Module Slots and Rear Connections

•

•

Frame Expansion

Product Summary

The NV8256-Plus manages standard-definition (SD), high-definition (HD) and 3.0 Gb/s (“3Gig”)
signal routing. See

Signal Rates Supported

on page 4. The routers can manage SD separately, or

SD, HD and 3.0 Gb/s signals combined. Support for SD and HD is called Super Wide Band (SWB).
Support for SD, HD, and 3.0

Gb/s is called “3Gig.”

The NV8256-Plus is a robust system capable of supporting signal rate of 10

Mb/s up to 3.0

Gb/s.

This enables you to invest in a single router to meet current routing needs and potential future
growth as industry standards evolve.

The router features a flexible I/O design enabling the implementation of a wide range of configura-
tions. A single NV8256-Plus can manage up to 256 inputs and 256 outputs. Using expansion ports,
two routers can be connected together to manage up to 512 inputs and 512 outputs. Within one
router, or between two connected routers, configurations can start at 16 inputs and 16 outputs,
increasing in increments of 16, up to 256 per router. Because inputs and outputs are independent,
configurations are based on 16, but do not have to be squared (i.e., 256×256, 512×512). For exam-
ple, if using the NV8256-Plus as a standalone router, switching configurations of 16 inputs and 256
outputs, 32 inputs and 256 outputs, 256 inputs and 48 outputs, and so on are valid. Similarly, if two
routers are connected together, non-square configurations of inputs and outputs can be created,
increasing in increments of 16 up to a maximum of 512 inputs and 512 outputs.

In addition, the NV8256-Plus features conversion of video signals from analog composite to SD
and SD to analog composite.

Frame Rack

The NV8256-Plus mounts in a rack with minimum dimensions of 22RU high by 19

″

wide by 18

″

deep. When placing the rack in your facility, be sure to leave enough space for air flow through the

«
...
11
12
13
14
15
...
»

Содержание NV8256-Plus

























































































Отзывы:

Нет отзывов

Похожие инструкции для NV8256-Plus

Бренд: ABB Страницы: 2

Бренд: FAAC Страницы: 12

Бренд: S-COM Страницы: 400

Бренд: Jetline Страницы: 58

Бренд: J3C Страницы: 2

Бренд: Parker Страницы: 44

Бренд: ICP DAS USA Страницы: 7

I-2533CS Series

Бренд: ICP DAS USA Страницы: 8

Бренд: Laser Страницы: 2

Бренд: LAS Страницы: 6

Бренд: Lars Thrane Страницы: 141

Бренд: NAPCO Страницы: 48

Magnum Alert 2600

Бренд: NAPCO Страницы: 68

TEMP2000 Series

Бренд: Samwontech Страницы: 91

Бренд: Warren rupp Страницы: 18

Бренд: Yamaha Страницы: 100

Бренд: Tamas Страницы: 12

Бренд: Tait Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды