Miranda FXE-1501 Скачать руководство пользователя

Страница: 2 / 23

GUIDE TO INSTALLATION AND OPERATION

FXE-1501

Electromagnetic Compatibility

This equipment has been tested for verification of compliance with FCC Part 15, Subpart B requirements for

Class A digital devices.

NOTE:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

This equipment has been tested and found to comply with the requirements of the EMC directive

2004/108/CE:

•

EN 55022 Class A radiated and conducted emissions

•

EN 55024 Immunity of Information Technology Equipment

•

EN 61000-3-2 Harmonic current injection

•

EN 61000-3-3 Limitation of voltage changes, voltage fluctuations and flicker

•

EN 61000-4-2 Electrostatic discharge immunity

•

EN 61000-4-5 Surge immunity

•

EN 61000-4-11 Voltage dips, short interruptions and voltage variations immunity

How to contact us:

For technical assistance, please contact the Miranda Technical support centre nearest you:

Americas

9:00 am – 9:00 pm EST
Tel:

+1 800 224 7882

Fax:

+1 514 335 1614

[email protected]

Asia

9:30 am – 6:00 pm GMT+8

Tel:

+852 2539 6987

Fax:

+852 2539 0804

[email protected]

Europe, UK, Middle East, Africa

9:00 am – 6:00 pm GMT

Tel:

+44 118 952 3444

Fax:

+44 118 952 3401

[email protected]

Emergency After Hours

(worldwide)

Tel:

1 800 224 7882

-or-
Tel:

1 514 333 1772

and choose menu
option 2

France

9:00 am – 5:00 pm GMT+1
Tel:

+33 1 55 86 87 88

Fax:

+33 1 55 86 00 29

[email protected]

China

9:30 am – 6:00 pm GMT+8
Tel:

+86 10 5873 1814

[email protected]

(Playout Automation Only)

9:00 am – 5:30 pm GMT
Tel:

+44 8705 004 350

Fax:

+44 8705 004 333

[email protected]

Visit our web site at

www.miranda.com

Содержание FXE-1501
























Результаты поиска

Содержание FXE-1501

Отзывы:

Похожие инструкции для FXE-1501

Бренды по названию

Популярные бренды

Miranda FXE-1501, Руководство по установке и эксплуатации

Результаты поиска

Содержание FXE-1501

Отзывы:

Похожие инструкции для FXE-1501

Бренды по названию

Популярные бренды