.......................................................................................................................................... 09
P
A
L
Model T3714C
LCD TV installation method
Connectors and sockets
Power Connection
Attach the AC power cord to the LCD-TV and plug into an appropriate wall outlet.
Turn the power on at the main switch (Next to the power
socket) to put the LCD TV into standby mode. The
standby indicator on the front will light up in red.
Power outlets differ from region to region.
Turning the LCD TV on
Press the
POWER
button on the front lower right of the TV to turn on the power or enter standby
mode.
Due to unstable local voltage, there will occasionally be a delay in POWER ON when the LCD
TV is switched on.
Programming TV channels
1. Press the
SOURCE
button on the remote control or on the control panel of LCD TV to select TV
mode.
2. Press the
MENU
button on the remote control to display the OSD menu.
3. Press the
button on the remote to highlight
TV Setup
and press the
button to select
TV
Setup
4. Press the
button on your remote to highlight
Auto Program Sort (APS)
and press the
button
to select
Auto Program Sort (APS)
5. Press the
buttons to select your country.
6. Press the buttons to select
Start APS
, and press the
button to start the tuning process.
(This will take a few minutes. The tuning process will find all available channels.)
7. You can watch TV now. Change channels by pressing the P and P buttons.
Power indicator Status
Green -- Power on
Red ---- Standby.
Power
few minutes
