Mira SDP044T, Инструкция по установке и эксплуатации

Страница: 23 / 44

23
OPERATION
1. Using your Mira Advance ATL
Electric showers work by taking in cold water and passing it over heating elements
contained in the tank body of the shower.
The showering temperature is adjusted by turning the temperature control knob,
which varies the fl ow of cold water passing over the elements. The slower the rate
of fl ow, the warmer the shower and vice versa. The holes in the spray plate of the
shower handset should always be kept clean to maintain a consistent fl ow and stable
shower temperatures.
N o t e ! A l w a y s c h e c k t h e s h o w e r
temperature before entering the shower.
The previous user may have selected a
different temperature.
1.1 Switch on the pull-cord or wall
mounted switch. The red "STOP"
indicator on the Mira Advance ATL
will provide a visual indication that the
power is on.
1.2 Press one of the three fl ow buttons,
"HIGH" , "MEDIUM" or "LOW" . The
adjacent green indicator will illuminate
and an audible tone will confi rm the
action.
For the Advance ATL Memory, press
one of the fi ve memory buttons.
Note! The temperature control knob
is inactive during memory control
operation.
1.3 Wait 15 - 20 seconds for warm water
to reach the handset. If the "LOW"
button was pressed then this time may
be longer.
1.4 If necessary turn the "TEMPERATURE"
control knob clockwise to increase
the temperature, or anticlockwise to
decrease the temperature. Wait 10–15
seconds for the adjusted temperature
to reach the handset. There will
be a change in fl ow rate when the
temperature is adjusted. The control
knob operates clockwise from cold to
hot and features a detent on the fi nal travel to the cold only position.
FLOW
FLOW
FLOW
HIGH
MEDIUM
LOW
HIGH
MEDIUM
LOW
HIGH
MEDIUM
LOW
5
6 4
7
8
2
9
1
5
6 4
7
8
2
9
1
5
6 4
7 3
8
2
1
5
4
7
3
8
2
9
1
5
4
7 3
8
2
9
1
Low Pressure
High
Medium
Low
Stop
Temperature
Reset
Flow
COLD
Clockwise
Î
WARMER
Î
less fl ow
Anticlockwise
Î
COOLER
Î
more fl ow