3. Safety
MiR1000 Quick start (en) 06/2020 - v.1.2 ©Copyright 2019-2020: Mobile Industrial Robots A/S.
25
3.2 General safety precautions
This section contains general safety precautions.
WARNING
Using a charger different from the one supplied by the manufacturer can
cause a fire.
•
Use only the original charger.
WARNING
Lithium battery packs may get hot, explode or ignite and cause serious injury if
they are abused electrically or mechanically.
Observe the following precautions when handling and using lithium batteries:
•
Do not short-circuit, recharge or connect with false polarity.
•
Do not expose to temperature beyond the specified temperature range or
incinerate the battery.
•
Do not crush, puncture or disassemble the battery. The battery contains
safety and protection devices, which, if damaged, may cause the battery to
generate heat, explode or ignite.
•
Do not allow the battery to get wet.
•
In the event the battery leaks and the fluid gets into one’s eye, do not rub
the eye. Rinse well with water and immediately seek medical care. If left
untreated, the battery fluid could cause damage to the eye.
•
Use only the original charger (cable charger or charging station) and
always follow the instructions from the battery manufacturer.
WARNING
Attempting to charge batteries outside the robot can lead to electrical shock
or burns.
•
Never charge the batteries outside the robot.
