Mipex MIPEX-02 Series, Руководство пользователя, Страница: 32 / 46

Optosense LLC USER MANUAL
Design department
SMALL-SIZE EXPLOSIVE GAS MEASURING
SENSOR MIPEX-02-X-X-X.1 X (RX)
ESAT.413347.005 UM Revision 3.0 January 19th, 2017 Page 32 of 46
THE SOLE PROPERTY OF OPTOSENSE LLC. ANY REPRODUCTION WITHOUT THE WRITTEN PERMISSION OF OPTOSENSE LLC IS PROHIBITED.
Table 8. Structure of response on <@> and <@*X> commands
Command <@> (hex:
“40 0D”) Command <@*X> (hex: “40 2A X 0D”)
Byte number 1 2 1 2 3
Byte data
8
C
1
H C
1
L
@ (hex: “40”)
C
1
H C
1
L
Table 9. Structure of response to <DATA> command
Command <DATA
> (hex: “44 41 54 41 0D”)
Byte number 1-5 6
Byte data C
1
hex: “0D”
Table 10. Structure of response to <DATAE> command
Command <DATAE
> (hex: “44 41 54 41 45 0D”)
Byte number 1 2 3 4 5
Byte data
9
C
1
H C
1
L StatusByte CRC
hex: “0D”
Table 11. Structure of response to <DATAE2> command
Command <DATAE2
> (hex: “44 41 54 41 45 32 0D”)
Byte
number
1 2 3 4 5 6
Byte data
10
C
1
H C
1
L StatusByteH StatusByteL CRC
hex: “0D”
Fig. 16. High and low bytes structure
8
High and low bytes structure is presented on Fig. 16.
9
If bits of status byte are true, check their meanings in Table 12 and perform recommended
operations.
10
If bits of status bytes are true, check their meanings in Table 12 and perform recommended
operations. High and low bytes structure is presented on Fig. 16.