background image

9

You must insert a memory card (not supplied) before you can start recording. The 

dash cam supports the Class 10 memory cards with 8 GB – 128 GB capacity. You 

should use separate MicroSD cards for recording and for regular data storage.
Hold the card (MicroSD) by the edges and gently insert it into 

the slot as shown in the illustration. 
To remove a card, gently push the top edge of the card inwards 

to release it and pull it out of the slot.

Formatting a card

To format a memory card (all data will be erased), press 

 > 

Format

.

Turning the dash cam on

Complete the installation according to the instructions in the “Using your dash cam 

in a vehicle” section. Once the vehicle engine is started, the dash cam automatically 

turns on. 

Note:

 Press and hold the Power button for 2 seconds to manually turn the dash cam on and off.

Shutting down the dash cam

Occasionally, you may need to perform a hardware reset when the dash cam stops 

responding or if it appears to be “frozen” or unresponsive. To turn off the dash cam, 

press and hold the Power button until the system shuts down.

If the system does not turn off by keeping the Power button pressed, you can force 

it to shut down by inserting a small rod (such as a straightened paper clip) into the 

Shutdown button of the device.

Содержание MiVue C540 Series

























Отзывы: