Minuteman TRS17, Инструкция по эксплуатации

Страница: 12 / 28

Page 12
Parts and Instruction Manual - TRS17 Total Recovery System
MACHINE OVERVIEW
1. Handle- Used to maneuver and position the TRS-17. Contains switch box (For switchbox, see #18)
2. Recovery tank lid- Allows access to recovery tank and creates a seal to ensure suction
3. Solution tank lid- Allows access to the solution tank and prevents external contamination of solution
tank
4. Accessory racks for hoses, cords, tools etc.- One large rack and one small rack on each side of the
machine. 4 total.
5. Wand storage bracket and velcro strap- Allows the operator to secure a wand attachment to the machine
for ease of transport
6. Non-marking front 4” locking casters and rear 10” wheels
7. Recovery/vacuum hose inlet barb- connect your recovery vacuum hose to this barb
8. Feed hose line for chemical with threaded bottle cap- secures the feed hose line to the chemical bottle
9. Bottle holder for chemical feed system- Holds up to a one gallon chemical bottle
10. GFCI breaker- Interrupts and disables the electrical system if a ground leak is detected.
11. Chemical dispensing valve- Select between “SOAP” and “RINSE” by turning to left or right as marked
12. Male twist lock pigtail- Connects to 50 ft. cord
13. Exhaust port hose barb- Used to connect to hose with blower attachment.
14. Pressure regulator- Decrease pressure by turning counter-clockwise or increase pressure by turning
clockwise
15. Priming/pressure relief valve- Prime system in the event of air lock. Relieves pressure in the event of
pressure lock
16. Solution line Q.D.- Pressurized connection for solution line
17. Recovery tank dump valve- Pull up to open
18. Switch box- one switch marked “PUMP” and one switch marked “VACUUM”. Switches light up when
powered on.