Minuteman TRS17, Инструкция по эксплуатации

Страница: 16 / 28

Page 16
Parts and Instruction Manual - TRS17 Total Recovery System
10. Spray the floor as you make your way out of the room
11. Allow the chemical to dwell according to the chemical manufacturers recommendations
12. You may use the brush on your squeegee/brush wand to agitate particularly soiled areas
13. When you are ready to rinse away the chemical, simply turn the chemical dispensing valve (#11 on
page 7) to the word “RINSE”
14. Set your pressure gun to the desired pressure by pulling the collar in or out. Rinse surfaces starting
from the top down
15. See “Recovering liquid” for final steps
Recovering liquid from hard surfaces:
The TRS-17 is equipped with two dedicated tools for liquid recovery: The squeegee/brush wand and the
Gulper tool.
1. Connect recovery vacuum hose to the recovery inlet barb (#7 on page 7).
2. Place the vacuum switch (see #18 on page 7) into the “ON” position.
3. Using either the squeegee/brush wand or the Gulper tool, to extract the liquid from the surface. (see
page 8).
4. Monitor the levels in the recovery tank and empty as necessary. Use defoamer to ensure your vacuum
motor does not take in foam/fluid.
Using the blower feature:
To use, this feature connect the Blower hose (#5 on page 8) to #13 on page 7 and turn on the vacuum
motor.
Convenient for:
t
Blowing fluid off countertops and walls onto the floor
t Drying faucets and other fixtures
t Blowing off dust
NOTE: Do not leave the blower hose on during normal extraction as it will reduce suction.