Minuteman RoboScrub 20, Руководство по эксплуатации

Страница: 21 / 60

21
Content Subject to Change •
988767UM REV A
UNPACK ROBOSCRUB 20
Check the packing crate for any damage, and immediately
report any damage to the delivery carrier. To unpack the
crate:
1. Remove plastic.
2. Remove box containing all robotic (autonomous)
equipment and review contents to ensure all items
are included.
3. Remove the walls from the pallet.
4. Remove the battery cover located on the back of
the RoboScrub 20.
5. The RoboScrub 20 is battery-operated and
designed to operate on 24 volts DC; (2) 12 volt
batteries. If necessary, insert both batteries.
Recommended Battery Speci fi cations: (2) 12 V
Discover Dry Cell Traction Valve Regulated Battery,
Model EV185A-A
NOTE: MINUTEMAN RECOMMENDS THAT
ONLY TRAINED FIELD TECHNICIANS
OR MAINTENANCE STAFF INSTALL
OR REPLACE BATTERIES. IMPROPER
BATTERY INSTALLATION CAN CAUSE
RISK TO USERS AND THE MACHINE.
6. Remove the tape from the two red battery
connectors and attach them together.
7. Place the battery compartment cover back in
position.
8. Remove the chock strips, squeegee straps, and
straps needed to secure the ramp.
9. Remove the ramp attached to the back of the pallet.
10. Use the supplied straps to secure the ramp to the
rear of the pallet.
11. Make sure the area behind the pallet is clear.
12. Remove the key that is strapped to the steering
wheel.
13. Sit on the operator seat, insert the ignition key and
turn to the right (clockwise) to start the RoboScrub
20.
14. Make sure the squeegee and scrub deck are raised.
15. Press the downward direction button arrow.
16. Slowly drive the machine backwards off the ramp.