Minuteman RoboScrub 20, Руководство по эксплуатации

Страница: 26 / 60

26
988767UM REV A
• Content Subject to Change
PRE-OPERATION CHECKS
The RoboScrub 20 is capable of both manual and robotic operation, thanks to BrainOS technology. A subscription to
Brain Corp’s Autonomy Services is required to use the RoboScrub 20’s robotic functions. Robotic mode means that the
RoboScrub 20 performs fl oor cleaning without direct, real-time operator control, which allows janitorial staff to focus on
other tasks.
NOTE: THE ROBOSCRUB 20 IS A HARD SURFACE FLOOR SCRUBBER ONLY , WITH NO SWEEP FUNCTIONALITY .
Before using the RoboScrub 20, always perform the following checks to ensure proper operation:
• Clear all obstacles from the areas to be cleaned to ensure maximum fl oor coverage.
• Be sure you understand the functions of all components and controls.
• Check the horn, warning light, and front and rear signal lights to ensure proper operation.
• Check the RoboScrub 20 for
fl uid leaks.
• Check the tank cover seal under the operator seat or
damage and excessive wear.
• Drain and clean the recovery tank, if necessary.
• Clean and rinse the recovery tank screened
fl oat, if
necessary.
• Drain and clean the solution tank, if necessary.
• Clean the solution
fi ll fi lter, if necessary.
• Check the vacuum hose for debris or blockage; fl ush out
any obstacles.
• Check the squeegee blade for damage, excessive wear, and
de fl ection. Rotate or replace as needed.
• Check that the scrub brush/pad is properly installed and is
clean of restricting debris, such as string, banding, plastic
wrap, etc.
• Make sure the batteries are fully charged and free of
damage.
• Check the brakes and steering to ensure proper operation.
• Check that all cameras and LIDARs are clean and free of
dust, dirt, and smudges. Clean with the provided micro fi ber
cloth, as needed.
• Using appropriate personal protective equipment, fi ll the
solution tank with a pre-mixed solution of an approved
cleaning chemical and clean water. Use the solution tank
site gauge to guide while pouring. Do not over fi ll.
• Check that the audible cues can be heard for the
RoboScrub 20.
• Place proper fl oor cleaning signage in areas where the RoboScrub 20 is operating in accordance with standard
fl oor cleaning practices.
WARNING
: DO NOT PUT ANY FLAMMABLE MATERIALS INTO THE SOLUTION BOTTLE OR CLEAN WATER
TANK. THIS CAN CAUSE AN EXPLOSION OR FIRE.