7
6
English
INSTALLATION PLACEMENT
These Battery Packs are only intended to be install in an indoor temperature
controlled environment that is free of conductive contaminants. DO NOT oper-
ate the Battery Pack in: extremely dusty and/or unclean areas, locations near
heating devices, water or excessive humidity, or where the Battery Pack is
exposed to direct sunlight. Select a location, which will provide good air circu-
lation for the Battery Pack at all times.
Route power cords so they cannot be
walked on or damaged.
Typical battery life is 3 to 5 years. Environmental
factors do affect battery life. High temperatures, and frequent, short duration
discharges have a negative impact on battery life.
INSTALLATION
Be sure to read the installation placement and all the cautions before installing
the Battery Pack. Place the Battery Pack in the final desired location and
complete the rest of the installation procedure.
WARNING! These Battery Packs are extremely heavy. Any time
the Battery Pack has to be handled be sure to use, enough person-
nel, strong supports and equipment to safely handle the Battery Pack.
ENVIRONMENTAL
Operating Temperature (max)
Operating/Storage Humidity
Operating Elevation
0 to 40
°
C (+32 to +104
°
F)
95% Non-Condensing
0 to 3,000m (0 to +10,000 ft)
Storage Elevation
0 to 15,000m (0 to +50,000 ft)
Storage Temperature
-15 to +45
°
C (+5 to +113
°
F)
3. INSTALLATION
English
REAR PANEL
A. The External Battery connector is for Daisy Chaining additional Battery Packs.
B. The DC Circuit Breaker connects and disconnects the DC bus voltage from the
Battery Pack to the UPS. The DC Circuit Breaker will trip in the event of a DC over-
current condition.
C. The External Battery cable is for connecting the Battery Pack to the UPS or Daisy
Chaining additional Battery Packs.
2. CONTROLS AND INDICATORS
