M I N T R O N I X C O M P U T E R S O L U T I O N S
124 Old Mill Road, Suite H
Greenville, SC 29607
855-672-6464
Page 9
Version 1-2018
Remove the screw on the center top of the MP5000I5v2 and use it to
secure the stand to the computer
Route all other peripheral cables through the stand
Connect them to the MP5000i5v2 computer. Set the computer in upright
position.
Connect all the peripherals to the cables
Turn the computer on
Install operating system software (pre-installed if purchased with system)
Install software driver
’
s
Install application software
11.0 BIOS Introduction
With the AMI BIOS Setup program, you can modify BIOS settings and control the
special features of your computer. The Setup program uses several menus for
making changes and turning special features on or off. This chapter describes the
basic navigation of the MP5000i5v2 setup screens.
11.1 BIOS Setup
The MP5000i5v2 computer has the AMI BIOS built in, with a CMOS SETUP utility that
allows users to configure required settings or to activate certain system features.
The CMOS SETUP saves the configuration in the CMOS RAM of the motherboard.
When the power is turned off, the battery on the board supplies the necessary power
to preserve the CMOS RAM.
When the power is turned on, press the <Del> button during the BIOS POST (Power-
On Self-Test) to access the CMOS SETUP screen.
