Mintech MC-1250, Руководство по эксплуатации

Страница: 16 / 36

16 / 36
moves on the rails fixing on the base. The laser unit and the cutting head move
on the rails fixing on the gantry frame.
There are four casters under the base. The left is the cabinet containing all
electric components. The right near the back is the vent, connecting it to exhaust
by pipe, thus can vent exhaust gas that cutting made.
The structure of cutting head is shown on Figure 2-2
1. locknut of cutting head 2. locknut 3. lock screw
4. nozzle 5. handwheel
Figure 2-2 The Cutting Head
In order to acquire good cutting quality, we must make laser beam passing
nozzle coaxially without being curtained off, so we need carry out adjustment
of the nozzle.
Adjustment means of coaxial situation:
Rotate four handwheels(5), make the nozzle(4) moving to a right position
and insure laser beam passing nozzle coaxially without being curtained off.
Adjustment means of focus position:
Loosen four lock nuts(2), rotate the bottom of cutting head, the nozzle move
up when rotating deasil, anticlockwise move down, the screw pitch is 1 mm.
Finally lock four nuts(2).
2.3.2 The laser unit and beam delivery system
The laser unit consists of laser head, power supply. This laser can give
you excellent mode quality, fast optical rise times, and high peak power. The