6
Note: Restart the camera after switching the dial code.
4.When the power supply switch is “
【
on
】
”, the indicator light is open (red color)
5, Camera initializes after powering on: horizontally to the left turn to the limit position,
vertically turn to the bottom; finally both horizontal and vertical turn to the middle position.
The motor stops running, and initialization is completed.(Note: If the power-on mode is
opened and saved preset position 0 or 1, then the pan/tilt will be set to 0 or 1 preset
position)
6.Factory Default : entry OSD menu by pressing the menu key of remote controller,
【
MENU
】
->
【
RESET
】
->
【
ALL RESET
】
, moving the left/right key to select
【
Yes
】 ，
then confirm by
【
HOME
】
key .
RESET
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
SYS. RESET
NO
CAM. RESET
NO
P T. RESET
NO
ALL. RESET
NO
BACK
／ＭＥＮＵ
8
--------
9
--------
A
--------
B
--------
C
--------
D
--------
E
--------
F
Display the video format set on the menu
