24
PT SET
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
POWER. ACT
SPEEDBYZ
MOUNT. MODE
IR M.SPEED
IR Z.SPEED
MIN.SPEED
SCAN. SPEED
BACK
／ＭＥＮＵ
返回／ＭＥＮＵ
POWER ACT: 0/1( the camera will move to no.0/1 preset position after 12 seconds
without control since power on), Off
SPEEDBYZ
：
only work for IR remote control:
On
（
when the camera zoom becomes larger, rotation speed comes down
）
, Off
MOUNT.MODE
：
UP, DOWN
IR M.SPEED
：
IR remote control move speed: 5~24
IR Z.SPEED
：
IR remote control zoom speed: 1~7
MIN.SPEED: Minimum start speed for serial command: 0~9
SCAN. SPEED: move speed: 4~15
5. RESET
Move the pointer to the (SET) in the Main Menu, click the
【
HOME
】
and enter the (SET) as
follow,
RESET
＝＝＝＝＝＝＝＝＝＝＝＝＝＝
SYS. RESET
CAM. RESET
PT. RESET
ALL. RESET
BACK
／
MENU
SYS. RESET
：
Protocol: VISCA; Address: 1; baud rate:9600;
Ｒ
S485:Off
CAM. RESET
：
camera parameter reset
PT. RESET
：
power action: Off; speed by zone: On; mount mode:Up;
IR move speed:16; IR zoom speed: 7;MIN.SPEED 0;SCAN. SPEED 10
