26
Wireless Launcher etc.
Image effective will not be good when the light is not accordant with camera’s lux.
Troubleshooting
Image
No image
1, Check whether the power cord, voltage is OK, power indicator light is ON.
2, Turn off the power supply to check whether the camera can auto configure.
3, Check the dial switch in bottom and make sure the two dial position are all on OFF.
4, Check video and TV wire is connected correctly.
Abnormal display of image
Check whether the video connecting wires is well and other connecting sockets and
camera
flat wires are well.
The camera can only works at one focus, other position can not be focused.
Change the position to see if this phenomenon still exists. If yes, it may be caused by
Camera control drive focus control system trouble.
Image dithering when at Maximum Zoom
1, Check whether camera is fixed correctly.
2, If there is vibrative mechanical object.
Remote Controller
1, Change the battery
2, Check the camera operation mode is right.
Terminal
1, Check the camera operation mode is right.
2, Check control wire is connected correctly.
