- 3 -
!
!
!
!
!
!
!
!
!
!
!
!
You should not tighten the wheel axle by tightening the left side knob.
You should not tighten the wheel axle by tightening the left side knob.
You should not tighten the wheel axle by tightening the left side knob.
You should not tighten the wheel axle by tightening the left side knob.
You should not tighten the wheel axle by tightening the left side knob.
This is for pre-adjusting the wheel position to the exactly center of the
This is for pre-adjusting the wheel position to the exactly center of the
This is for pre-adjusting the wheel position to the exactly center of the
This is for pre-adjusting the wheel position to the exactly center of the
This is for pre-adjusting the wheel position to the exactly center of the
drive roller only. Securley tightening your bike to the trainer should be
drive roller only. Securley tightening your bike to the trainer should be
drive roller only. Securley tightening your bike to the trainer should be
drive roller only. Securley tightening your bike to the trainer should be
drive roller only. Securley tightening your bike to the trainer should be
done with the right side hub handle only.
done with the right side hub handle only.
done with the right side hub handle only.
done with the right side hub handle only.
done with the right side hub handle only.
WARNINGS
Use two-wheeled bicycles only. Tandems may be used if balanced correctly.
Use two-wheeled bicycles only. Tandems may be used if balanced correctly.
Use two-wheeled bicycles only. Tandems may be used if balanced correctly.
Use two-wheeled bicycles only. Tandems may be used if balanced correctly.
Use two-wheeled bicycles only. Tandems may be used if balanced correctly.
Remove all oils and moisture from the drive roller and the tire before use.
Remove all oils and moisture from the drive roller and the tire before use.
Remove all oils and moisture from the drive roller and the tire before use.
Remove all oils and moisture from the drive roller and the tire before use.
Remove all oils and moisture from the drive roller and the tire before use.
Keep both hands on handlebars at all times and maintain a normal riding position.
Keep both hands on handlebars at all times and maintain a normal riding position.
Keep both hands on handlebars at all times and maintain a normal riding position.
Keep both hands on handlebars at all times and maintain a normal riding position.
Keep both hands on handlebars at all times and maintain a normal riding position.
Check the couplings supporting the rear hub for damage and cracks.
Check the couplings supporting the rear hub for damage and cracks.
Check the couplings supporting the rear hub for damage and cracks.
Check the couplings supporting the rear hub for damage and cracks.
Check the couplings supporting the rear hub for damage and cracks.
Accidents may occur from cracked or damaged couplings. (Fig. A)
Accidents may occur from cracked or damaged couplings. (Fig. A)
Accidents may occur from cracked or damaged couplings. (Fig. A)
Accidents may occur from cracked or damaged couplings. (Fig. A)
Accidents may occur from cracked or damaged couplings. (Fig. A)
When using the trainer, place it on a flat surface for safe training.
When using the trainer, place it on a flat surface for safe training.
When using the trainer, place it on a flat surface for safe training.
When using the trainer, place it on a flat surface for safe training.
When using the trainer, place it on a flat surface for safe training.
Do not over tighten the hub-clamp handles. Over-tightening may cause damage to the trainer or
Do not over tighten the hub-clamp handles. Over-tightening may cause damage to the trainer or
Do not over tighten the hub-clamp handles. Over-tightening may cause damage to the trainer or
Do not over tighten the hub-clamp handles. Over-tightening may cause damage to the trainer or
Do not over tighten the hub-clamp handles. Over-tightening may cause damage to the trainer or
bicycle frame. The clamp handles should be a snug and secure fit. Do not force!
bicycle frame. The clamp handles should be a snug and secure fit. Do not force!
bicycle frame. The clamp handles should be a snug and secure fit. Do not force!
bicycle frame. The clamp handles should be a snug and secure fit. Do not force!
bicycle frame. The clamp handles should be a snug and secure fit. Do not force!
Keep away from small children, and keep hands and feet away from spinning rollers and wheels at
Keep away from small children, and keep hands and feet away from spinning rollers and wheels at
Keep away from small children, and keep hands and feet away from spinning rollers and wheels at
Keep away from small children, and keep hands and feet away from spinning rollers and wheels at
Keep away from small children, and keep hands and feet away from spinning rollers and wheels at
all times.
all times.
all times.
all times.
all times.
Before use, make sure all bolts and nuts are securely fastened.
Before use, make sure all bolts and nuts are securely fastened.
Before use, make sure all bolts and nuts are securely fastened.
Before use, make sure all bolts and nuts are securely fastened.
Before use, make sure all bolts and nuts are securely fastened.
• Read all instructions carefully before use.
• Read all instructions carefully before use.
• Read all instructions carefully before use.
• Read all instructions carefully before use.
• Read all instructions carefully before use.
• Some assembly required.
• Some assembly required.
• Some assembly required.
• Some assembly required.
• Some assembly required.
• Keep the manual handy at all times.
• Keep the manual handy at all times.
• Keep the manual handy at all times.
• Keep the manual handy at all times.
• Keep the manual handy at all times.
• Do NOT use trainer for any other purpose than instructed.
• Do NOT use trainer for any other purpose than instructed.
• Do NOT use trainer for any other purpose than instructed.
• Do NOT use trainer for any other purpose than instructed.
• Do NOT use trainer for any other purpose than instructed.
• The trainer is manufactured to precise standards. You may not disassemble or rebuild it.
• The trainer is manufactured to precise standards. You may not disassemble or rebuild it.
• The trainer is manufactured to precise standards. You may not disassemble or rebuild it.
• The trainer is manufactured to precise standards. You may not disassemble or rebuild it.
• The trainer is manufactured to precise standards. You may not disassemble or rebuild it.
• "Magturbo" is the trademarks of Minoura Co.,Ltd. and may not be copied.
• "Magturbo" is the trademarks of Minoura Co.,Ltd. and may not be copied.
• "Magturbo" is the trademarks of Minoura Co.,Ltd. and may not be copied.
• "Magturbo" is the trademarks of Minoura Co.,Ltd. and may not be copied.
• "Magturbo" is the trademarks of Minoura Co.,Ltd. and may not be copied.
IMPORTANT NOTES
Replace your quick release skewer with the one supplied and install the coupling protector cap on
Replace your quick release skewer with the one supplied and install the coupling protector cap on
Replace your quick release skewer with the one supplied and install the coupling protector cap on
Replace your quick release skewer with the one supplied and install the coupling protector cap on
Replace your quick release skewer with the one supplied and install the coupling protector cap on
to the right side coupling of the trainer. Otherwise the stability will not be guaranteed.
to the right side coupling of the trainer. Otherwise the stability will not be guaranteed.
to the right side coupling of the trainer. Otherwise the stability will not be guaranteed.
to the right side coupling of the trainer. Otherwise the stability will not be guaranteed.
to the right side coupling of the trainer. Otherwise the stability will not be guaranteed.
Open the legs fully to get maximum stability.
Open the legs fully to get maximum stability.
Open the legs fully to get maximum stability.
Open the legs fully to get maximum stability.
Open the legs fully to get maximum stability.
Remove the coupling protector cap when you use your own quick release skewer.
Remove the coupling protector cap when you use your own quick release skewer.
Remove the coupling protector cap when you use your own quick release skewer.
Remove the coupling protector cap when you use your own quick release skewer.
Remove the coupling protector cap when you use your own quick release skewer.
(Fig. A)
