Minolta MAGICOLOR 2 PLUS, Руководство пользователя

Страница: 68 / 262

:) 0; <
%
0*3:9);
Select paper with high opacity for duplex printing. Opacity refers to how effectively
paper blocks out what is written on the opposite side of the page. If the paper has low
opacity (high transparency), then the printed data from one side of the page will show
through to the other side. For best results, print a small quantity to make sure the
opacity is acceptable.
While the QMS magicolor 2+ CXE and GXE don’t have an automatic duplexing option,
you can duplex print manually: Print on one side of the paper, reinsert the printed
sheet(s) into the media cassette (blank side up and the top of the page toward the
back of the printer), and then print the second side.
» Note:
Media jams may occur if the printed sheet(s) reinserted in the media cassette
are not entirely flat.
#0 *1
2-sided (duplex) printing can be done automatically with the QMS magicolor 2+ EXD.
There is no need to manually reinsert the paper.
Plain paper and limited thick stock up to 28 lb bond (105 g/m²) can be auto duplexed.
For heavier weights, manual duplexing is recommended.
In the printer driver (Job tab, Duplex Options), select Long Edge (flipped horizontally
as in a loose-leaf notebook) or Short Edge (flipped vertically as on a clipboard).
» Note: Duplexed letterhead must be loaded face-down with the top of the media (the
letterhead or memo information) toward the front of the cassette.