User Mode Settings
6
Rev. /
6-3
6.2
Recalling Copy Job Programs
Recall a stored copy job program.
1
Touch the Job Recall box on the Control Panel.
The display will change.
2
Touch the program location under
which the desired copy job program
is stored.
or
Touch the [Account Job] box to
display supplementary program
locations for your access number.
The display will change.
3
Check your function settings.
?
Is one of the settings incorrect?
Ü
Press the appropriate key to go
straight to the area in which you
can correct your setting.
?
Are your settings correct?
Ü
Touch the [Exit] box. The
display will change.
4
Touch the [Exit] box to confirm your program location selection.
.
Why enter the Number of Originals?
The Number of Originals will be queried if your program contains a
copier mode that requires the Number of Originals.