Minolta DiMAGE F200, Инструкция по эксплуатации

Страница: 51 / 67

100
101 S
ETUP MODE
LCD monitor brightness
The brightness of the LCD monitor can be set in
eleven levels. The brightness setting screen is
opened from the basic section of the setup menu
(p. 98); the lens will extend if retracted. Use the
left/right keys of the controller (1) to adjust the
brightness, the monitor image will change
accordingly. Press the central button of the
controller (2) to set the brightness level.
Formatting memory cards
The formatting function is used to erase all data on a memory card. Before formatting a
memory card, copy the data to a computer or storage device. Locking images will not
protect them from being deleted when the card is formatted. Always format the memory
card using the camera; never use a computer to format a card.
When the format option is selected and entered in the basic section of the setup menu
(p. 98), a confirmation screen will appear. Choosing “Yes” will format the card, choosing
“No” will cancel the formatting operation. A screen will appear to indicate the card has
been formatted.
If the card-not-recognized message appears, the inserted card in the camera may need
to be formatted. A memory card used in another camera may also have to be formatted
before being used. If the unable-to-use-card message appears, the card is not
compatible with the camera and cannot be formatted.
Auto power save
To conserve battery power, the camera will shut down if no operation is made within a
certain period. The length of the auto-power-save period can be changed to 1, 3, 5, or 10
minutes. When the camera is connected to a computer, the auto-power-save period is
fixed at ten minutes.
Language
The language used in the menus can be changed. The language is selected in the basic
section of the setup menu.
If file number memory is selected, when a new folder is created, the first file stored in the
folder will have a number one greater than the last file saved. If the file number memory
is disabled, the image file number will be 0001. File number memory is activated in the
custom 1 section of the setup menu.
If file number memory is active and the memory card is changed, the first file saved to
the new card will have a number one greater than the last file saved on the previous card
if the new card does not contain an image with a greater file number. If it does, the file
number of the new image will be one greater than the greatest on the card.
File number (#) memory
High
1
2
When a memory card is formatted, all data on the card is erased.
Low
:enter