Minolta CF2002, Руководство по обслуживанию

Страница: 141 / 298

FrameMaker Ver5.5E(PC) CF3102/CF2002 SWITCHES ON PWBs/TECH. REP. SETTINGS
02.06.05
S-8
User’s Choice: 1
Item Purpose Setting/Precautions
Confirmation
Beep
To select whether to enable or dis-
able the beep that sounds each
time a key on the control panel is
pressed. The default setting is ON.
ON OFF
Date/Time Set
To set the time-of-day, date, and
time zone and start the clock. • The default setting is 00:00, January
1, 2000.
• For the time zone, set the time differ-
ence from the Greenwich Mean
Time.
Memory
Recall
To select whether to permit recall-
ing and copying of image data
which has previously been sub-
jected to a copy cycle. The default setting is Yes.
Yes No
Auto Panel
Reset
To set the time it takes the Auto
Panel Reset function to be acti-
vated after a copy cycle has been
completed or the last key oper-
ated.
The default settings are estab-
lished when Auto Panel Reset is
activated.
It is also used to set the priority
display that will be given when
Auto Panel Reset is activated. • Use the 10-Key Pad to enter the
Auto Panel Reset time (1 to 9 min.).
• The default setting is 1 min.
1 min (1 to 9) No
• The default priority display is Copy.
Energy Saver
To set the time it takes the copier
to enter the Energy Saver mode
after a copy cycle has been com-
pleted or the last key operated. • Use the 10-Key Pad to enter the time
(10 to 240 min.).
• The default setting is 15 min.
15 min (10 to 240)
Sleep
To set the time it takes the copier
to enter the Sleep mode after a
copy cycle has been completed or
the last key operated.
If the system consists of only a
copier, all power is shut down, but
if a printer controller is mounted
on the copier, only the 5-V line
turns ON. • Use the 10-Key Pad to enter the time
(15 to 240 min.).
• The default setting is 30 min.
30 min (15 to 240)
• The option of “No” becomes avail-
able only if “Yes” is selected for “Dis-
able Sleep Mode” of the “Admin.
Mode.”
Auto Clear
Mode
To select whether to reset the
copying mode functions to the
default ones when the Plug-In
Counter is unplugged, a magnetic
card is pulled out, or the access
number is entered for the Copy
Track function. The default setting is Yes.
Yes No