Minolta CF1501, Руководство оператора, Страница: 258 / 285

11
Troubleshooting
11-2 CF1501/CF2001
The edge of the copy is dirty. Either the document pad or
the document transfer belt is
dirty. Clean the document pad or
the document transfer belt
with a soft cloth dampened
with mild detergent. Refer to
p. 12-9.
The selected copy paper size
is larger than the document
(with Zoom set to “× 1.000”). Select a copy paper size that
is the same as the size of the
document. Refer to p. 6-4.
Otherwise, set Zoom to “Auto
Size” to enlarge the copy to
the selected paper size. Re-
fer to p. 6-14.
The orientation of the docu-
ment is different from the ori-
entation of the copy (with
Zoom set to “× 1.000”). Select a copy paper size that
is the same as the size of the
document. Otherwise, select
a copy orientation that is the
same as the orientation of
the document.
The copy was reduced to a
size smaller than the copy
paper (a Custom Zoom set-
ting was selected). Select a zoom ratio that ad-
justs the document size to
the selected paper size. Re-
fer to p. 6-15. Otherwise, set
Zoom to “Auto Size” to re-
duce the copy to the selected
paper size. Refer to p. 6-14.
The image is not aligned
properly on the paper. The document is not posi-
tioned correctly. Correctly position the docu-
ment against the document
width scale. Refer to p. 5-11.
Correctly load the document
into the duplexing document
feeder, and then slide the
document guides against it.
Refer to p. 5-4.
The document is not posi-
tioned correctly in the du-
plexing document feeder. Open the duplexing docu-
ment feeder, and correctly
position the document
against the document width
scale. Refer to p. 5-11.
The original glass is dirty
(while using the duplexing
document feeder). Wipe the glass with a soft dry
cloth. Refer to p. 12-8.
The document guides are not
positioned along the edges
of the paper. Slide the document guides
against the edges of the pa-
per.
Curled paper was loaded into
the paper drawer. Flatten the paper before
loading it.
Symptom Possible Cause Remedy