Minolta CF1501 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 285

Minolta CF1501 Скачать руководство пользователя страница 16

1

Introduction

1-6

CF1501/CF2001

USER INSTRUCTIONS
FCC PART 15 - RADIO FREQUENCY DEVICES (For U.S.A. Users)

NOTE: This equipment has been tested and found to comply with the lim-
its for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harm-
ful interference when the equipment is operated in a commercial environ-
ment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Oper-
ation of this equipment in a residential area is likely to cause harmful in-
terference in which case the user will be required to correct the
interference at his own expense.

WARNING: The design and production of this unit conform to FCC regu-
lations, and any changes or modifications must be registered with the
FCC and are subject to FCC control. Any changes made by the purchaser
or user without first contacting the manufacturer will be subject to penalty
under FCC regulations.

This device must be used with a shielded interface (Parallel) cable and
shielded network (10/100BaseT) cable.
The use of non-shield cables is likely to result in interference with radio
communications and is prohibited under FCC rules.

INTERFERENCE-CAUSING EQUIPMENT STANDARD (ICES-003 IS-
SUE 3) (For Canada Users)

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003
du Canada.

For users in countries subject to Class B regulations

This device must be used with shielded interface (Parallel) cable and
shielded network (10/100Base-T) cable.
The use of non-shield cables is likely to result in interference with radio
communications and is prohibited under CISPR 22 and local rules.

For users in countries not subject to Class B regulations

WARNING

This is a Class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take
adequate measures.

This device must be used with shielded interface (Parallel) cable and
shielded network (10/100Base-T) cable.
The use of non-shield cables is likely to result in interference with radio
communications and is prohibited under CISPR 22 and local rules.

«
...
14
15
16
17
18
...
»

Содержание CF1501






























































































































































































































































































Отзывы:

Нет отзывов