Minolta CF1501 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 285

Minolta CF1501 Скачать руководство пользователя страница 18

1

Introduction

1-8

CF1501/CF2001

LED Radiation Safety

This product is a copier which operates by means of a LED (light emitting
diodes) exposure system. There is no possibility of danger from the LED
optical radiation, because the LED optical radiation level does not exceed
the accessible radiation limit of class 1 under all conditions of operation,
maintenance, service and failure.

1.3

Guide to Manuals

Enclosed Manuals

The manuals listed below are enclosed with this copier. In order to refer
to the Operator’s Manual quickly when necessary, store it near the copier.

G

Operator’s Manual
The Operator’s Manual describes the functions, operating procedures,
precautions, and basic troubleshooting for this copier. Before using
this copier, be sure to read the Operator’s Manual thoroughly in order
to ensure that the copier operates properly and is used efficiently.

G

Quick Guide
The Quick Guide provides basic operating procedures, maintenance,
precautions, and basic troubleshooting for this copier in an easy-to-un-
derstand format. Refer to the Quick Guide if you do not understand an
operation or if a problem occurs.

Explanation of Manual Conventions

The marks and text formats used in this manual are described below.

WARNING

Failure to observe instructions highlighted in this manner may result
in fatal or critical injuries.

§

Observe all warnings in order to ensure safe use of the copier.

CAUTION

Failure to observe instructions highlighted in this manner may result
in serious injuries or property damage.

§

Observe all cautions in order to ensure safe use of the copier.

«
...
16
17
18
19
20
...
»

Содержание CF1501






























































































































































































































































































Отзывы:

Нет отзывов