MINOLTA-QMS PagePro 9100 Скачать руководство пользователя страница 145

Страница: 145 / 192

Relocating the Printer

139

If you are going to use the printer without the optional media tray(s),
reconnect the printer’s interface cables.

Reconnect the power cord, and turn
on the printer.

In compliance with UL guide-
lines, “The appliance inlet is
considered to be the main
disconnect device.”

Relocating the Printer

How do I relocate my printer?

Occasionally, you may have to move your printer to a different location, either
nearby or to a distant location.

To avoid damage to your printer, we advise you to follow the next instructions
very carefully.

Turn off the printer.

If the printer has accessories, such as a 4-bin mailbox, remove them.

If you are moving to a distant location, follow the instructions for repacking
the printer on page 140.

Relocate the printer.

WARNING!

Your printer weighs approximately 61.7 lbs (28 kg) without
consumables. Be sure to have help when lifting and moving it.

ACHTUNG! Das Gewicht dieses Druckers beträgt ohne
Verbrauchsmaterial ca. 28 kg. Bitte versuchen Sie niemals, den Drucker
alleine anzuheben oder zu transportieren.

Set up the printer in its new location.

Reinstall the accessories you removed in step 2.

Содержание PagePro 9100

































































































































































































Результаты поиска

Содержание PagePro 9100

Отзывы:

MINOLTA-QMS PagePro 9100, Руководство пользователя, Страница: 145 / 192

Результаты поиска

Содержание PagePro 9100

Отзывы: