MINOLTA-QMS PagePro 9100, Руководство пользователя

Страница: 65 / 192

Preventing Media Jams
59
appear to start normally, but then flush without printing. The CrownView
screen will indicate that the file has printed.
To correct the problem, increase the amount of time allowed before the PS
Wait Timeout expires. The factory default setting for this timeout is 30
seconds. Doubling the value to 60 seconds in the Administration/Communi-
cations. Timeouts/PS Wait Timeout menu should correct most problems, or
the value can be set to 0 seconds, which effectively makes the timeout period
infinite.
Preventing Media Jams
Make sure that... Avoid...
Media matches the printer
specifications. Media that is folded, wrinkled, or
excessively curled.
Media is flat, especially on the
leading edge. Double feeding (remove the media
and fan the sheets—they may be
sticking together).
The printer is on a flat, hard, stable,
level surface. Allowing buildup of static electricity
from fanning large quantities of
transparencies, or buildup of
transparencies in the output tray.
You have the correct media type
selected if you’re printing on
envelopes, labels, thick stock, or
transparencies. Loading more than one type/size/
weight of media in a tray at the
same time.
You store media in a dry location
away from moisture and humidity. Overfilling the media input trays.
You always adjust the media width
regulation guides in the media tray
after inserting the media. Allowing the output tray to fill past
the limit of 400 sheets of 20 lb bond
(64 g/m
2
) plain paper.
You load the media printing-side
up.* Allowing the 4-bin mailbox to fill
past the limit of 50 sheets of 20 lb
bond (64 g/m
2
) plain paper.
Notes: *Many manufacturers place an arrow on the end of the wrapper to
indicate the printing side—if you can’t determine which side of the media to
print on, remove the media from the tray, rotate the stack a half-turn, turn
the stack over, and then place it back in the tray.