MINOLTA-QMS PagePro 9100 Скачать руководство пользователя страница 143

Страница: 143 / 192

Deinstalling Accessories

137

How do I remove a 4-bin mailbox?

Turn off the printer.

Unplug the power supply cord and interface cable.

Remove the four mailbins (trays) from the 4-bin mailbox.

Disconnect the 4-bin mailbox cable
from the connector on the printer.

Press

Unplug the connector

Press in the two buttons

(one on

each side) at the back of the 4-bin
mailbox, and then lift the sorter up off
the transport unit

Remove the two screws securing the
transport unit, and then remove the
transport unit from the printer.

Return the stopper to its original
position.

Install the two brackets, the back
section of the top cover, and the
connector cover, removed during
installation of the 4-bin mailbox.

If you are going to use the printer without the 4-bin mailbox, reconnect the
printer’s power supply cord and interface cable.

How do I remove an optional media tray?

Turn off the printer, and unplug the
power supply cord and interface
cable.

Remove the upper media tray.

Содержание PagePro 9100

































































































































































































Результаты поиска

Содержание PagePro 9100

Отзывы:

MINOLTA-QMS PagePro 9100, Руководство пользователя, Страница: 143 / 192

Результаты поиска

Содержание PagePro 9100

Отзывы: