GETTING STARTED
5
minnkotamotors.com
To learn a new remote ID:
1.
Retract the anchor if it is not already retracted by pressing the
auto UP switch
.
2.
after the anchor has retracted, press and hold the auto UP switch
on the Talon. a steady tone
will be heard.
3.
While continuing to press the auto UP switch
, press the UP button
on the new remote one time.
4.
a series of 3 beeps
will be heard, indicating the new remote has
been learned.
5.
Release the auto UP switch
on the Talon after the 3 beeps begin.
To erase all stored remote IDs (this may require assistance from a
second person):
1.
Retract the anchor if it is not already retracted.
2.
Disconnect the power cable white power lead from the battery.
3.
Press and hold the auto UP switch
on the Talon.
4.
While continuing to press the auto UP switch
, reconnect the power
cable white power lead to the battery.
5.
a series of fast beeps will be heard and then a long steady tone
.
6.
Release the auto UP switch
after the long steady tone has begun.
all remote IDs are now erased.