minnkotamotors.com
SERVICE & MAINTENANCE
16
minnkotamotors.com
Remote Battery Replacement
1.
Make sure hands are clean, dry and static free. Discharge any static
electricity by touching a metal object that is grounded.
*Static electricity can damage the circuit board.
2.
With the remote upside down, remove the four case screws.
3.
Remove the bottom cover.
4.
Carefully remove the old battery from the battery holder and replace
with a new one. The batteries snap in and out of the battery holder.
Install the new battery with the positive (+) side facing up away from
the circuit board. Use
a name brand CR2032
lithium coin cell battery.
5.
Replace back cover and
reinstall case screws.
Do not over tighten
case screws as this
will damage the
remote enclosure.