5 | minnkotamotors.com
©2022 Johnson Outdoors Marine Electronics, Inc.
1
a. Use a 7/16” Box End Wrench to hold one of the six
Nylock Nuts securing the Mount to the Outer Plate
of the Quick Release Bracket. Use a Socket Wrench
to loosen and remove the 1/4” x 1 1/8” Socket Head
Screws held in place by the Nylock Nut.
b. Remove the Nylock Nut at the end of each screw.
Remove all six Socket Head Screws until the Mount
is free from the Outer Plate.
c. Set the old Mount aside. Retain the Outer Plate of
the Quick Release Bracket for the new Mount.
NOTICE:
Retain the hardware securing the Mount to
the Quick Release Bracket. If new hardware is required
to install the Mount Kit to the MKA-23 or RTA-19 Quick
Release Bracket, Minn Kota recommends purchasing
Bag Assembly (Part #2994854) on line at
.
Remove Mount from the MKA-23 or RTA-19
1a
Base
Base
Extrusion
Extrusion
Screw
Screw
Outer
Outer
Plate
Plate
Buckle
Buckle
Flat Washer
Flat Washer
Nylock
Nylock
Nut
Nut
Side Plate
Side Plate
Outboard
Outboard
Inboard
Inboard
Hold
Hold
Down
Down
Strap
Strap
NOTICE:
Depending on the bolt pattern used to install
the Ultrex Mount to the Outer Plate of the Quick Release
Bracket, the Right Side Plate may need to be removed to
access the mounting holes in the base of the Mount. Use
a #2 Screwdriver to remove the Side Plate if necessary.
INSTALLATION OF THE NEW MOUNT
a. Place the Ultrex Accessory Mount (Item #2) on an
elevated, level surface such as a workbench or the
tailgate of a pickup. The Mount, as removed from the
box, should be in the deployed position.
b. A 5/16” Allen Screw is located on the Mount. The
Screw is on the opposite end of the Mount from
the hinge. The hinge allows the Mount to stow and
deploy. Remove the 5/16” Allen Screw with a 1/4”
Allen Wrench. Retain the two 1/4-20 X 3/4 Screws
(Items #10) secured to the Mount with the Allen
Screw for later in the installation. Retain the Allen
Screw and Lock Washer for reassembly.
Assembly of Steering Module to the Ultrex Accessory Mount
Allen Screw with
Allen Screw with
Lock Washer
Lock Washer
Mount
Mount
Deployed
Deployed
Stowed
Stowed
1
#2 x 1
#10 x 2
ITEM(S) NEEDED
NOTICE:
To prevent seizing of the stainless steel
hardware, do not use high-speed installation tools. High-
speed installation tools will cause the hardware to gall and
make disassembly challenging.