Minitech Mini-Mill Series, Руководство пользователя

Страница: 5 / 34

MINITECH
CNC Mini-Mill User's Guide
Federal Communications Commission Statement
This equipment complies with the requirements in part 15.103(c) of FCC Rules for Test
Equipment. Operation of this equipment in a residential area may cause interference to radio
and TV reception requiring the operator to take whatever steps are necessary to correct the
interference. This unit is not for resale to the general public.
There is no guarantee that interference will not occur in a particular installation. If this
equipment does cause interference to radio of television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try and correct the interference
by one or more of the following measures:
Reorient the receiving antenna.
Relocate the computer with respect to the receiver.
Move the computer away from the receiver.
Ensure that the expansion slot covers are in place when no board is installed.
Use properly shielded cables and connectors.
Plug the computer into a different outlet so that the computer and the receiver are on
different branch circuits.
If necessary, the user should consult the dealer or an experienced radio/television technician
for additional suggestions. The user may find the following booklet prepared by the Federal
Communication Commission helpful: “How to Identify and Resolve Radio-TV Interference
Problems.” This booklet is available from the
US Government Printing Office, Washington, DC, Stock no. 004-000-00345-4.
© 2012 Minitech Machinery Corp. 5