CHARGE YOUR DEVICES – POWER
Using the supplied power cable, you can take power out of the Minirig to charge or power any device which uses 5V USB power.
The Minirig automatically detects when a device is trying to draw power and activates the power output.
plug the round end into the minirig
power socket. ensure you push it in
firmly to make the connection.
Plug your device’s USB charging cable into the
Minirig power cable USB socket – marked “OUT”
Plug your USB charging cable into your device.
When on charge, the LED will fade ON in a repeating 2 second cycle. The colour represents the battery level.
A full charge will take around 6-8 hours. Once the battery is charged, the LED will stop this repeating cycle.
If the Minirig is off, press the button once to active the power without turning it on, After a few seconds power will flow and
stabilise
charging
At any time you can charge the Minirig using the supplied power cable.
plug the round end into the minirig
power socket. ensure you push it in
firmly to make the connection.
Next insert the USB plug end marked “IN” into
any powered USB socket.
USB sockets can be found on most comput-
ers and mobile phone chargers.
When on charge, the LED will fade ON in a repeating 2 second cycle. The colour represents the battery level.
A full charge will take around 6 hours. Once the battery is charged, the LED will stop this repeating cycle.
When the Minirig is ON, the colour of the LED will indicate the battery level.
green: 75-100% cyan: 50-75% blue: 25-50% purple: 5-25% red: 0%
When the Minirig is OFF you can check the battery status by pressing the button once (do not press and
home