high gain
low gain
high and low gain in when using a cable
linking up minirigs
linking-up with subwoofer and Minirigs
The top socket will put the Minirig in high gain, the bottom
socket low gain. push it in firmly to make the connection. You
can still change gain using the button as in Bluetooth mode.
You can turn the Minirig OFF and ON by pressing and holding the
button. However, it will stay in AUX mode until you remove all
the audio cables
In AUX mode, removing the audio cables will also turn the Mini-
rig OFF. Again there will be no tone in AUX mode.
You must do this before you can use the Minirig in Bluetooth
mode.
In AUX mode you can use the spare audio socket to link out to
another Minirig or Minirig subwoofer. If using a subwoofer,
please feed the audio into the Bluetooth Minirig FIRST as shown
below. Ensure that you match the gain levels.
in aux mode you can use the minirig splitter cable
to give you stereo sound, splitter cable can be
purchased here
http://minirigs.co.uk/shop/acces-
sories.
when using a subwoofer ensure you plug your audio
device into the sub first, then use the splitter ca-
ble to link out of the sub to the
minirigs.
home